STAND ASSEMBLY

Standard Stand

Standard stand is a stand, assembled from standard exhibition equipment, rented by the organizer of the exhibition. For the construction of such stands, an equipped area is usually used.

This is the cheapest way of building stands, but due to a wide range of equipment provided, the use of film tinting and the ability to print any images on film, it allows you to create stands of original design - everything depends on your imagination.

We have selected several different stands from different years built at our exhibition and placed their photographs here, as an example of what can be done from standard equipment. Pictures can be zoomed by a click.

Here you can see examples of assembled from standard equipment stands with a sub-specification:

STANDARD STANDS

Example 1

Corner stand 3Х3 m, with showcase for small-scale products, economy version of construction:

Example 2

Corner stand 3Х3 m, with showcase for small-scale products and coat stowage compartment, standard version of construction:

Example 3

Corner stand 3Х3 m, extremely economy version of construction:

Example 4

Terminal stand 3Х7 m, with showcases for small-scale products, pedestals for big tools and duty room:

Here is any photos of this stand, big as life, only with fascia boards:

Example 5

It`s example, how you can make original stand from standart elements - corner stand 3Х4 m, with showcases and duty room.



And photos of stand, two different variants of pasting:


Full catalog of the exhibition equipment:

Catalog of the Exhibition Equipment

Tailor-made stand - individual design and construction

Tailor-made stands are stands designed and built by exhibitors independently, usually with the help of firms specializing in the development and construction of exhibition stands.

Usually non-standard stands are an indicator of prestige, so when building them, the emphasis is not only on places for demonstration of products, but also on the fact that the stand is maximally distinguished in the exposition and attracts the attention of visitors.

The stands of individual design usually far outperform the standard ones, but once you have built such a stand, you can use it at other exhibitions. Some of our participants for several years or exhibited with the same stand, or use a part of the old elements when creating a new stand.

We chose several different stands from the buildings that were being built in different years at our exhibition and placed their photographs here. Pictures can be zoomed by a click.

When building individual stands we recommend contacting the firm ORTEXPO - the official constructor of the company FAREXPO. In this case, you will not be charged for independent construction.

OOO ORTEXPO LTD, St. Petersburg, Yuria Gagarin Avenue, 8
E-mail: stend@ortexpo.ru
Tel./fax: (812) 777-04-07 (ext. 633)
Mob. tel.: (911) 248-33-55
Romanov Maxim, Technical Director

Details you can find at www.ortexpo.ru


Stand Design Services

In addition to the rental and installation of exhibition equipment, exhibitors can take advantage of the following services:

Hanging point equipment - a fastening device for hanging flags, banners, etc. - anything that can be hung manually - above the exposition in the place indicated by the exponent within the stand area. The cost of one suspension point (up to 50 kilos) is 172 Euro.

Equipment of suspension point with winch - fastening device for suspension of heavy structures - trusses fixing lighting devices, stand construction elements, etc., above the exposition of the exponent indicated in the stand area. The cost of one winch is 96 Euro.

Placement of text on the frieze or other elements of the stand and furniture - Arial font, the default color is dark blue, height 100 mm. The cost of one sign is 2 Euro. For tenants of the equipped area, an inscription of up to 15 characters is free. Punctuation marks are considered separate signs, spaces are not considered.

Placement of the logo on the fascia board or other elements of the stand and furniture - placing a logo costs 37 Euro.

We remind you that the images submitted to the exhibition management must meet the technical requirements:

TECHNICAL REQUIREMENTS

REQUIREMENTS FOR PRINTING FILM LABELS:

Layouts should be prepared in the following software packages: Adobe Illustrator, Corel PHOTO-PAINT, Adobe Photoshop, CorelDRAW.

For graphical layouts prepared in vector packages (Adobe Illustrator, CorelDRAW, etc.)
- All fonts must be converted to curves.
- The thickness of the vector lines (strokes) should be at least 0.05 pt (size).

For layouts prepared in graphic (raster) packages (Adobe Photoshop, Corel PHOTO-PAINT, etc.)
- The image must be saved in TIF format.
- The image must have a resolution of at least 150 dpi (pixels per inch) with a real size.
- All layers or objects (if any) are combined in one layer (background).
- The image should not include any color profiles, masks and alpha channels.
- The thickness of the contour lines must be at least 0.25 pt (size).


REQUIREMENTS FOR ADVERTISING MODULES FOR THE CATALOG:

Modules should be prepared in the following software packages: Adobe Illustrator, Adobe Acrobat, Adobe Photoshop, CorelDRAW.

For modules prepared in vector packages (Adobe Illustrator, Corel draw, etc.)
- All fonts used in your publications should be transformed into "curved" lines.
- All graphic (pixel) images should be completely placed in the publication.
- All graphic (pixel) images should have a resolution of at least 300 dpi (pixels per inch) in full size.
- All graphic (pixel) and vector images should be transferred to the CMYK printing palette.
- The thickness of the vector lines (strokes) should be at least 0.05 pt (size).
- The total density of BLACK color on the channels (in the CMYK palette the sum of the percentage of each channel should not exceed 280 i.e., C + M + Y + K = 280).

For modules prepared in graphic (raster) packages (Adobe Photoshop, Corel PHOTO-PAINT, etc.)
- The publication must have a resolution of at least 300 dpi (pixels per inch) in full size.
- The publication must be performed in the CMYK printing palette.
- All layers (if any) are combined in one layer (background).
- The publication should not contain any additional channels except CMYK.
- The publication should not include any color profiles.
- The thickness of the contour lines must be at least 0.25 pt (size).
- The total density of BLACK color on the channels (in the CMYK palette the sum of the percentage of each channel should not exceed 280 i. e, C + M + Y + K = 280).

The dimensions of the modules, "indents" and "departures for bleed" should correspond to the following scheme::
- Obligatory departures "for bleed" by 5 mm (i.e. this part of the layout is cut off).
- The size of your layout in electronic form should be 155X220 mm.


REQUIREMENTS FOR MATERIALS FOR WEB-PAGE PLACEMENT

All images must be in GIF, JPEG or PNG format with a resolution of 72 dpi (dots per inch) in full size. The possibility of publishing flash-banners is coordinated with the Directorate individually.


REQUIREMENTS FOR STAND DESIGN MATERIALS

All images intended for cutting must be prepared only in vector form in the following software packages: Adobe Illustrator, CorelDRAW. Raw images traced from raster images are not accepted.
- All fonts must be converted to curves.
- The thickness of the vector lines (strokes) should be at least 0.05 pt (itema).
- All colors should be selected on the palette ORACAL 641, otherwise we will choose matches from this palette.

If the image contains halftone transitions, gradients, blurred edges, etc., then for its use when decorating a stand, full-color film printing is required. For the coordination of images submitted for printing on tapes, please contact the exhibition management.


Pasting with color film - for gluing the film of colors of the palette ORACAL 641 is used. Paint coloring is available in our equipment catalog. The Exhibitor must choose the required color on it and inform the exhibition management about his number, as well as the list of the elements to be glued. We will calculate for you the required area of the film, which together with the color number will need to be entered in Appendix 1 to the Contract Application. The area of the film is rounded up to an integer number of meters in a larger direction. The cost of pasting is 13 Euro/ sq. m.

Full-color printing of films - according to the sketches of the exhibitor and pasting - the cost of 41 Euro per square meter, for coordination of all questions please contact the exhibition management.


EXHIBITION

Overview
Exhibition schedule
Exhibition profile
Exhibitors list
Partners
Venue
plan o the exhibition 2023 Photo/video
Exhibition archive

VISITORS

Reasons to visit
Invitation card
Opening times for visitors
Venue

EXHIBITORS

Terms of participation
Preliminary application
VIP-format
Stand assembly
Requirements for layouts
Customs clearance

PROGRAMME

Conference programme

PRESS CENTRE

Press releases
Post-releases
Media accreditation